CARLO GAVAZZI EN61036 Manuel d'utilisateur télécharger pdf (Page 8)

▲

■

Access to the main menu

To access to the programming

menus from the measuring and dis-

play phase, press the key: when

the instrument asks for the pass-

word, enter the correct PASS value

by means of the and keys;

afterwards confirm by means of the

key. If the password is correct

(when the instrument is new, the

password is 0), the instrument goes

to the main functions menu.

■

Change Password

This function allows the operator to

choose the desired password value

(from 0 to 1000).

Choose the “CnG.PASS” function

by means of the and keys,

then press to modify PASS, en-

ter the desired value by means of

the and keys and confirm

the new value with the key.

Programming

1.2..

..2.1

Access to the

main menu

1.2..

..2.1

Index

VT ratio

When the “AL” box (normally used for the alarm in-

dication) is active during the programming phase, it

means that the displayed value can be modified. This

rule applies to all the programming menus.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Pas de commentaire

CARLO GAVAZZI EN61036 Manuel d'utilisateur Page 8